Where can I find drivers for my COREDMHBA8, COREDMHBA16 and COREDMHBAHD16

• Related Articles

• Where can I find my 2ndLook License Key?

  The 2ndLook License Key is used to activate 2ndLook and was sent in an email when you first purchased the software. If you can not find that email or did not receive it there are two other ways to get the License Key: 1. Through the IO Industries ...

• I can't find the multicast settings box in the connect tab

  Follow the steps here: My camera is connected to a GigE Vision switch, but its status shows it as disconnected If the camera supports multicasting, the multicast settings box will load after pressing "Reconnect/Rescan".

• CameraLink Communication with DVR Express Core

  CameraLink Registry Path For Serial Communication From the start menu launch "regedit" to edit registry entries. Go to HKEY_LOCAL_MACHINE > SOFTWARE > cameralink and look at the CLSERIALPATH variable. Programs should search for the clserio3.dll in ...

• How to Check if Camera Data Rate is too High Using Storage Manager

  This article will help verify if the data rate of the attached cameras is too high for the VidIO module drive set installed in your DVR Express CORE 2 recorder. Before starting make sure your DVR is set up properly, the attached cameras are ...

• Is it Possible to Use Consumer SSD Drives on a Core and Core 2?

  DVR Express Core 2 Consumer SSDs will not be recognized by Core 2 devices. VidIO Drive Modules are the only storage media that will function with a DVR Express Core 2 device. These must be purchased from IO Industries. DVR Express Core Supports ...