I can't find the multicast settings box in the connect tab

• Related Articles

• How to Check if Camera Data Rate is too High Using Storage Manager

  This article will help verify if the data rate of the attached cameras is too high for the VidIO module drive set installed in your DVR Express CORE 2 recorder. Before starting make sure your DVR is set up properly, the attached cameras are ...

• Where can I find my 2ndLook License Key?

  The 2ndLook License Key is used to activate 2ndLook and was sent in an email when you first purchased the software. If you can not find that email or did not receive it there are two other ways to get the License Key: 1. Through the IO Industries ...

• How to record from a dual-full CameraLink source on a CORE2CLMAX using image stitching

  Second generation CameraLink DVRs can record from a dual-full CameraLink source using CoreView's image stitching feature. This article will summarize the steps to create a custom camera descriptor and enabling image stitching to allow a CORE2CLMAX to ...

• Where can I find drivers for my COREDMHBA8, COREDMHBA16 and COREDMHBAHD16

  Please visit the manufacturer's website to download the appropriate driver for your operating system: COREDMHBA8 (9207-8e): https://www.broadcom.com/products/storage/host-bus-adapters/sas-9207-8e#downloads COREDMHBA16 (9201-16e or ...

• CameraLink Communication with DVR Express Core

  CameraLink Registry Path For Serial Communication From the start menu launch "regedit" to edit registry entries. Go to HKEY_LOCAL_MACHINE > SOFTWARE > cameralink and look at the CLSERIALPATH variable. Programs should search for the clserio3.dll in ...