What are the limitations of the 2ndLook trial version?

What are the limitations of the 2ndLook trial version?

Trial mode is a limited version of 2ndLook that is available for exploring the software prior to licensing.
Below is a list of limitations/notes for 2ndLook that are in effect in trial mode:

Limitations
  • Recordings can be created with a maximum length of 10 seconds
  • A maximum of two recordings can be created
  • On start-up no recordings will be loaded
  • Recordings can be reviewed, but the images will have watermarks on them
  • Video can only be recorded to the Video Library Demo format
  • Recordings created in trial mode cannot be opened in the full version
  • Recordings can be exported to any of the available formats (except for Video Library), but they will contain watermarks
  • When reviewing one of the trial recordings, the recorded data may be displayed as grayscale, even if the recording was of color data

Notes

  • Unlimited live video with no alterations can be viewed from any number of cameras
  • There is no time limit for using the demo version

    • Related Articles

    • What are the limitations of the Streams 7 trial verison?

      The following limitations are found in the Streams 7 trial: Limited Sessions: Any time the Streams 7 Trial is launched, this counts as one session. Registration Keys are generated with a limited number of sessions; the default is 10. Once the session ...

    • How to Initiate a Remote Session

      The current version of Teamviewer directly available from their website is not compatible for our remote access. You must download and run our Remote Access Client from the link below. TeamViewer is a software application that allows IO Industries ...

    • How to configure an IOI CoaXpress camera in single link with an Active Silicon FireBird framegrabber

      This article assumes an Active Silicon FireBird frame grabber and it's appropriate software have already been installed on a control PC.  This example uses an IO Industries Victorem 89B93CCX. If a different IOI CoaXpress camera is being used, please ...

    • How to Check if Camera Data Rate is too High Using Storage Manager

      This article will help verify if the data rate of the attached cameras is too high for the VidIO module drive set installed in your DVR Express CORE 2 recorder. Before starting make sure your DVR is set up properly, the attached cameras are ...

    • How to Update Flare and Victorem Camera Firmware

      Prior to beginning the update process, confirm that the camera's power up default is set to factory. The process to update the camera(s) is as follows: 1. With the camera(s) powered, launch the Flare/Victorem Firmware Updater application.  The ...