How do I switch my camera to USB3 Vision Mode? (Ximea)

How do I switch my camera to USB3 Vision Mode? (Ximea)

Some cameras have the capability to run in different connection modes. If a camera is plugged in to a USB 3.0 port but is in GigE Vision mode, the camera will not be detected properly. Consult your camera's manual on how to switch your camera to USB3 Vision mode.
Note: Switching between modes is not a standard operation and cannot be done in 2ndLook or Streams 7. This configuration will have to be done in the camera manufacturer's software.

Ximea
Ximea USB3 Vision cameras start in GigE Vision mode by default. See this article on how to switch your Ximea camera to USB3 Vision Mode:
http://www.ximea.com/support/wiki/usb3/Switching_Cameras_to_USB3_Vision_Mode